JOY-it COM-ZYPDS-02 USB PD Trigger Module
ALMENNAR UPPLÝSINGAR
Kæri viðskiptavinur,
- Thank you for choosing our product. Below, we will show you what you need to bear in mind when commissioning and using the product.
- Ef þú lendir í einhverjum óvæntum vandamálum við notkun skaltu ekki hika við að hafa samband við okkur.
- The ZYPDS USB-PD trigger module is a particularly compact and practical auxiliary module for voltage requests from USB-C power supplies. It enables the targeted request of a specific output voltage via the USB Power Delivery protocol and is ideal for test setups, in-house developments or laboratory applications.
- The module is set to 5 V as default. By specifically removing one or two resistors, the output voltage can be changed to 9 V or 12 V. This permanent configuration via solder adjustment is particularly suitable for applications that require a fixed, stable output voltage.
- The input is via a USB-C socket and the output via solder pads, so that the desired voltage can be used directly. Thanks to its small size, the ZYPDS module can be easily integrated into compact projects or used as a measurement and development adapter.
The module requires a USB-C PD power supply that supports the desi-red output voltage. It is not a voltage converter, but merely a trigger module that requests the selected voltage from the PD power supply.
TÆKI LOKIÐVIEW
REKSTUR
- Connect your USB-PD trigger module to an USB PD-compatible power sup-ply. This module provides you with three voltage modes. The mode can be changed by soldering the resistors.
- There are 2 different Board designs of this module. Please compare the layout of your module with the pictures below, too see wich modifications are needed for your module.
- Skipulag 1
- When both resistors are soldered in, the output voltage er 5 V.
- If the resistor on the left side of the circuit board is soldered in place (USB-C facing upwards) the output voltage is also 5 V.
- If the resistor on the board is soldered firmly on the right (USB-C facing upwards), the output voltage er 12 V.
- If no resistor is connected, the output voltage er 9 V.
- 15 V og 20 V binditage modes cannot be achieved with this module. Instead, you can use our COM-ZYPDS, which is specifically designed for 15 V and 20 V, rather than 9 V and 12 V like the COM-ZYPDS-02.
- Skipulag 2
- The second layouts default voltage is also 5 V.
- To change it to 9 V, you unbridged / disorder both C3 & C4
- To change it to 12 V, you just have to remove the solder bridge C3.
UPPLÝSINGAR OG AFTURTAKASKYLDUR
Our information and take-back obligations under the German Electrical and Electronic Equipment Act (Electro)
Tákn á raf- og rafeindabúnaði
This crossed-out wheelie bin symbol means that electrical and electronic equipment must not be disposed of with household waste. You must take old appliances to a collection point. Before disposal, you must remove any old batteries and accumulators that are not enclosed in the old appliance.
- Skilavalkostir
As an end user, when purchasing a new device, you can return your old device (which essentially performs the same function as the new one purchased from us) for disposal free of charge. Small devices with external dimensions not exceeding 25 cm can be handed in in normal household quantities, regardless of whether you purchase a new device.
Option to return items to our company location during opening hours: SIMAC Electronics GmbH, Pascal Street 8, D-47506 Neukirchen-Vluyn - Return option near you
We will send you a parcel label so that you can return the device to us free of charge. To do so, please contact us by e-mail at Service@joy-it.net eða í gegnum síma. - Upplýsingar um umbúðir
Vinsamlegast pakkaðu gamla tækinu þínu vel fyrir flutning. Ef þú ert ekki með viðeigandi umbúðaefni eða vilt ekki nota þitt eigið, vinsamlegast hafðu samband við okkur og við sendum þér viðeigandi umbúðir.
STUÐNINGUR
We are also there for you after your purchase. If you still have questions or encounter any problems, we are also available to assist you via email, telephone and our ticket support system.
- Netfang: þjónusta@joy-it.net
- Miðakerfi: https://support.joy-it.net
- Sími: +49 (0)2845 9360 – 50
- Fyrir frekari upplýsingar, vinsamlegast heimsækja okkar websíða: www.joy-it.net
www.joy-it.net
SIMAC Electronics Limited
Algengar spurningar
Can I achieve 15 V and 20 V output modes with COM-ZYPDS-02?
No, COM-ZYPDS-02 is designed for 9 V and 12 V output modes. For 15 V and 20 V, you should use COM-ZYPDS specifically designed for those voltages.
Skjöl / auðlindir
 |
JOY-it COM-ZYPDS-02 USB PD Trigger Module [pdfLeiðbeiningarhandbók COM-ZYPDS-02, COM-ZYPDS-02 USB PD Trigger Module, USB PD Trigger Module, PD Trigger Module, Trigger Module |