Wizard 2 Switch 2 NYXI TMR leikjastýring

Kæri spilari,
Þakka þér fyrir að kaupa vöruna okkar.
Áður en þú notar vöruna skaltu lesa vöruhandbókina vandlega.

INNIHALD PAKKA

• NJ10 Left Controller x1
• NJ10 Right Controlle x1
• NJ10 Middle Bridge x1
• Multi-function Receiver x1
• USB-C hleðslusnúra x1
• Receiver Extension Cable x 1

TÆKNIFRÆÐIR

• Tengingar: Bluetooth 5.0, 2.4G
• Wireless Battery Capacity: 400mAh (per controller)
• Hleðsla: 5V/0.4A í gegnum USB-C
• Efni: PC + ABS + Metal + Silicone
• Þyngd: 225g
• Stærð: 106*155*55,smm

LÝSINGARSKYNNING

CONNECTING TO NINTENDO SWITCH

1. Slide the controller downward along the rails on both sides of the console screen until it clicks. The “Controllers” interface on the console will display connected left/right controllers.
2. To remove the controller, press the release button on the back of the controller and slide it upward.
3. When the console is powered on, detaching the controller from the rails will automatically establish a Bluetooth connection with the Switch.
4. When the console is powered off, detach the controller from the rails and press the Home Button to power on and reconnect.
5. After successfully connecting to Switch, the controller vibrates for 1 second.

RECEIVER CONNECTION TO PC

(XINPUT MODE)

1. Press and hold the Home Button for 3 seconds to power on. LEDs 1-4 on both controllers will flash green sequentially.
2. Insert the receiver into the PC and press and hold its button until the LED blinks rapidly.
3. Bíddu eftir pörun.

(DINPUT MODE)

1. In Xinput mode, press and hold A+ B + Home to switch to Dinput mode. LEDs 1-4 will blink green three times.
2. Repeat the same key combination to switch back to Xinput mode.

RECEIVER CONNECTION TO PC/NGC
Press and hold the home button of the right handle for 5 seconds to tum on the device, and the LED1-4 of the right handle will flash green.

Plug the receiver into the computer, and press and hold the button on the receiver until the LED flashes quickly.

Wait for the right handle and receiver to pair successfully, and the LED lights of the receiver and the handle will be on.

Press and hold the button on the receiver again until the LED flashes quickly, and press and hold the screen button on the left handle for 5 seconds until the LED1-4 of the left handle flashes green.

Wait for the left handle and receiver to pair successfully before it can be used normally.

RECEIVER CONNECTED TO WII
Tum on the Wii console, enter the game, and connect the original controller. After entering the game, unplug the original adapter, and then plug the NJ10 receiver into the console, and press and hold the button on the receiver until the LED flashes quickly.
Press and hold the home button of the right handle for 5 seconds to tum on the device, and the LED1-4 of the right handle will flash green.
Wait for the right handle and receiver to pair successfully, and the LED lights of the receiver and the handle will be on.

Long press the button on the receiver again until the LED flashes quickly, and long press the screen button on the left handle for 5 seconds until the left handle LED1-4 flashes green water.

KVARÐUN STJÓÐPINNA

1. Press SL+ SR+ + Button (left controller: – Button) to enter calibration mode. Rotate the joysticks and press the same keys again to exit. A 1-second vibration confinns completion.
2. Switch System Calibration: Navigate to Settings> Controllers & Sensors Calibrate Control Sticks and follow on-screen instructions.

KVARÐARKVARÐI

Press SL+ SR+ Home (left controller: Capture Button) to enter calibration mode. Press triggers fully to calibrate. Exit using the same keys (1-second vibration confirms completion).

6-AXIS GYROSCOPE CALIBRATION

1. Á rofi: Navigate to Settings> Controllers & Sensors > Calibrate Motion Controls.
2. Place the controller on a flat surface and follow on-screen prompts. Press -and + Buttons to complete calibration.

TURBO FUNCTION

1. Stuðningshnappar: D-pad, A, B, X, Y, L, R, ZL, ZR.
2. Virkja Turbo: Hold the Setting Button, press a target button, then release.
   LED4 glows white.
3. Stilla hraða: Default is 12Hz (adjustable via app).
4. Slökkva á Turbo: Press the Setting Button + target button three times (LED4 turns off).

Hnappaforritun

* Back Buttons (M1/M2): Can be mapped to other buttons or macros (max 21 actions per macro).

1. Kortlagning: Hold Setting Button + target back button for 3 seconds. Press the desired button/macro sequence, then press the back button again to save.
2. Hreinsa kortlagning: Hold Setting Button + back button for 3 seconds, then press the back button without input.

Framleiðandi: Shenzhen MIKE Morgen Technology Co.,Ltd
Heimilisfang: 3/F, Building 5, Block C, Fairview Plaza, Xiangjiaotang Community,Sakata
Umsækjandi: NYXI Gaming Inc
Heimilisfang: 4520 Centennial Bivd NUM1004, Colorado Sorinas CO 80919
Gerð: NJ10 FCC ID: 2A88F-NJ10

Samræmisyfirlýsing
Model: NJ10

The product conforms to EC standards for radio interference. Here, Shenzhen MIKE Morgen Technology Co.,Ltd. In Shenzhen announces that NJ10 radio equipment conforms to the Directive. EN IEC 62368-1:2020+A11:2020, EN 50663:2017, EN 62479:2010, ETSI EN 301 489-1 V2.23(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09), ETSI EN 300 328 V2.2.2(2019-07).
Fullan texta samræmisyfirlýsingar ESB má finna á: www.nyxigame.com

Gerð: NJ10
FCC auðkenni: 2A88F-NJ10

FCC yfirlýsing

1. Þetta tæki er í samræmi við 15. hluta FCC reglnanna. Rekstur er háður eftirfarandi tveimur skilyrðum:
   1. Tækið gæti ekki valdið skaðlegum truflunum.
   2. Tækið verður að taka við öllum truflunum sem berast, þar með talið sem getur valdið óæskilegri notkun.
2. Breytingar eða breytingar á þessari einingu sem ekki hafa verið samþykktar sérstaklega af þeim aðila sem ber ábyrgð á samræmi gæti ógilt heimild notanda til að nota búnaðinn.

Athugið: This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and,if not installed and used in accor dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Stilltu eða færðu móttökuloftnetið
• Auka fjarlægð milli búnaðar og móttakara.
• Stingdu búnaðinum í innstungu á annarri rafrás en þeirri sem móttakarinn er tengdur við.
• Hafðu samband við dreifingaraðilann þinn eða reyndan útvarps-/sjónvarpstæknimann til að fá aðstoð.

Táknið þýðir að ekki skuli farga vörunni með heimilisúrgangi heldur skal fara með hana á viðeigandi söfnunarstað til endurvinnslu. Samkvæmt gildandi reglum skal ekki farga vörunni eða endurhlaðanlegri rafhlöðu með venjulegu heimilisúrgangi.

Viðeigandi förgun á notuðum vörum og endurhlaðanlegum rafhlöðum hjálpar til við að koma í veg fyrir neikvæð áhrif á umhverfið og heilsu manna.

VARÚÐARRÁÐSTAFANIR

Skjöl / auðlindir

NYXI Wizard 2 Switch 2 NYXI TMR Game Controller [pdfNotendahandbók Wizard 2 Switch 2 NYXI TMR Game Controller, Switch 2 NYXI TMR Game Controller, NYXI TMR Game Controller, Game Controller

Heimildir

• Notendahandbók