TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Tæknilýsing

• Gerð: Q103
• Samhæfni: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Tengingar: Bluetooth, 2.4G Wireless, USB (Type-C)
• Vinnandi binditage: DC 3.7V
• Vinnustraumur: < 30mA
• Svefnstraumur: < 5uA
• Hleðsla Voltage/Núverandi: DC 5V/500mA

Úrræðaleit

• Stýring tengist ekki:
  • Gakktu úr skugga um að stjórntækið sé fullhlaðið.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Gakktu úr skugga um að kveikt sé á Bluetooth í tækinu þínu.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Hnappar svara ekki:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Prófaðu stjórnandann í öðrum leik eða forriti.
• Innsláttartöf:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Lágmarka truflanir frá öðrum þráðlausum tækjum.
  • Try connecting via USB cable if available.
• Stýringin hleðst ekki:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Prófaðu aðra snúru af gerðinni C eða straumbreyti.
  • The LED indicator should show the charging status.

Q103 Hagnýtur skýringarmynd

1. D-pad hnappur
2. X/Y/A/B hnappur
3. HOME Reconnect/Power Button
4. PAR Hnappur
5. SELECT hnappur
6. TURBO hnappur
7. Vinstri stýripinna/L3 hnappur
8. Hægri stýripinn/R3 hnappur
9. HREINUR hnappur
10. START hnappur
11. L hnappur
12. L2 hnappur
13. Type-C hleðsluhöfn
14. R2 hnappur
15. R hnappur
16. Endurstilla gat
17. LED
18. Mode Switch

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 og nýrri

Bluetooth tenging

1. Snúðu rofanum: Skiptu yfir í X til að fara í X-INPUT ham.
2. Fyrsta notkun (kveikt á pörun):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • Ljósdíóðan er alltaf rauð þegar endurtenging hefur tekist.
3. Notaðu aftur (Endurtenging):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. Ljósdíóðan er alltaf rauð þegar endurtenging hefur tekist.
4. Press the PAIR button to power off the device.

ROFA stillingu

Bluetooth tenging

1. Snúðu rofanum: Skiptu yfir í S til að fara í rofastillingu.
2. Fyrsta notkun (kveikt á pörun):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   Ljósdíóðan er alltaf græn þegar endurtenging hefur tekist.
3. Notaðu aftur (Endurtenging):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus fyrir Android

Android 9.0 og nýrri

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Fyrsta notkun (kveikt á pörun):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Notaðu aftur (Endurtenging):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Ýttu á Para hnappinn til að slökkva á tækinu.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Uppfærsla fastbúnaðar

1. Tengdu V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Stillingar stýripinnans

• Kvörðun valtara
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Rafmagnsbreytur

• Vinna voltage: DC3.7V
• Vinnustraumur: <30mA
• Svefnstraumur: < 5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Biðtími: 30 dagar (fullhlaðin)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Svefn/vökuaðgerð:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

FCC viðvörun

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Stilltu eða færðu móttökuloftnetið.
• Auktu aðskilnað milli búnaðar og móttakara.
• Tengdu búnaðinn í innstungu á annarri hringrás en þeirri sem móttakarinn er tengdur við.
• Hafðu samband við söluaðilann eða reyndan útvarps-/sjónvarpstæknimann til að fá aðstoð.

Varúð: Allar breytingar eða breytingar á þessu tæki sem ekki hafa verið samþykktar af framleiðanda gætu ógilt heimild þína til að nota þennan búnað.
Þetta tæki er í samræmi við 15. hluta FCC reglnanna. Rekstur er háður eftirfarandi tveimur skilyrðum:

1. Þetta tæki má ekki valda skaðlegum truflunum, og
2. Þetta tæki verður að taka við öllum truflunum sem berast, þar með talið truflunum sem geta valdið óæskilegri notkun.

Þessi búnaður er í samræmi við geislaálagsmörk FCC sem sett eru fram fyrir óviðráðanlegt umhverfi. Þessi búnaður ætti að vera settur upp og notaður með minnst 0 cm fjarlægð á milli ofnsins og líkamans.