Uniview ITC413-PW4D-IZ1 4MP Bullet LPR myndavél

Fyrirvari og öryggisviðvaranir

Yfirlýsing um samræmi við útflutning
We comply with applicable export control laws and regulations worldwide, including that of the People’s Republic of China and the United States, and abides by relevant regulations relating to the export, re-export and transfer of hardware, software and technology. Regarding the product described in this manual, we ask you to fully understand and strictly abide by the applicable export laws and regulations worldwide.

Fyrirvari

• The company shall not be liable for any special, incidental, consequential, or indirect damages arising from the use of this manual or the company’s products, including but not limited to loss of business profits, loss of data, or documents.
• The products described in this document are provided “as is.” Unless required by applicable law, this manual serves only as a user guide, and all statements, information, and recommendations do not constitute any express or implied warranties, including but not limited to warranties of merchantability, satisfactory quality, fitness for a particular purpose, or non-infringement of third-party rights.
• If you connect the product to the internet, you do so at your own risk, including but not limited to potential cyberattacks, hacker attack, virus infections, etc. You should strengthen the protection of your network, device data, and personal information, and take necessary measures to ensure the security of your device and network. The company assumes no responsibility for any product malfunctions, information leaks, or related issues caused by such risks. However, the company will provide relevant security maintenance and support in a timely manner.
• Unless explicitly prohibited by applicable law, the company and its employees, licensors, or affiliates shall not be liable for any direct or indirect losses arising from the use or inability to use the product or service, including but not limited to loss of profits or sales, data loss, or the cost of procuring substitute goods or services, business interruptions, etc., even if they have been informed of the possibility of such damages. Certain jurisdictions do not allow limitations on liability for personal injury, incidental, or consequential damages, so this limitation may not apply to you.
• The company’s total liability for all damages shall not exceed the amount you paid for the product purchased from the company.

Áminning um persónuvernd
We comply with appropriate privacy protection laws and is committed to protecting user privacy. You may want to read our full privacy policy at our websíðuna og fá að vita hvernig við vinnum með persónuupplýsingar þínar. Vinsamlegast hafðu í huga að notkun vörunnar sem lýst er í þessari handbók getur falið í sér söfnun persónulegra upplýsinga eins og andlit, fingrafar, númeraplötu, tölvupóst, símanúmer, GPS. Vinsamlega farið eftir lögum og reglum á hverjum stað við notkun vörunnar.

Um þessa handbók

• Þessi handbók er ætluð fyrir margar gerðir vöru og myndir, skýringarmyndir, lýsingar o.s.frv. í þessari handbók geta verið frábrugðnar raunverulegu útliti, virkni, eiginleikum osfrv., vörunnar.
• Þessi handbók er ætluð fyrir margar hugbúnaðarútgáfur og myndirnar og lýsingarnar í þessari handbók geta verið frábrugðnar raunverulegu GUI og virkni hugbúnaðarins.
• Despite our best efforts, technical or typographical errors may exist in this manual. We cannot be held responsible for any such errors and reserve the right to change the manual without prior notice.
• Notendur bera fulla ábyrgð á tjóni og tapi sem stafar af óviðeigandi notkun.
• We reserve the right to change any information in this manual without any prior notice or indication. Due to such reasons as product version upgrade or regulatory requirement of relevant regions, this manual will be periodically updated.

Netöryggi
Vinsamlegast gerðu allar nauðsynlegar ráðstafanir til að auka netöryggi fyrir tækið þitt.

Eftirfarandi eru nauðsynlegar ráðstafanir fyrir netöryggi tækisins:

• Breyttu sjálfgefnu lykilorði og stilltu sterkt lykilorð: Þú ert eindregið mælt með því að breyta sjálfgefna lykilorðinu eftir fyrstu innskráningu og stilla sterkt lykilorð sem er að minnsta kosti níu stafir, þar á meðal alla þrjá þættina: tölustafi, bókstafi og sérstafi.
• Haltu fastbúnaði uppfærðum: Mælt er með því að tækið þitt sé alltaf uppfært í nýjustu útgáfuna fyrir nýjustu aðgerðir og betra öryggi. Heimsæktu embættismanninn okkar websíðuna eða hafðu samband við söluaðila þinn til að fá nýjustu fastbúnaðinn.

Eftirfarandi eru ráðleggingar til að auka netöryggi tækisins:

• Skiptu reglulega um lykilorð: Breyttu lykilorði tækisins þíns reglulega og geymdu lykilorðið öruggt. Gakktu úr skugga um að aðeins viðurkenndur notandi geti skráð sig inn á tækið.
• Virkjaðu HTTPS/SSL: Notaðu SSL vottorð til að dulkóða HTTP-samskipti og tryggja gagnaöryggi.
• Virkja IP tölu síun: Leyfa aðeins aðgang frá tilgreindum IP tölum.
• Lágmarks hafnarkortlagning: Stilltu beininn þinn eða eldvegg til að opna lágmarksgáttir fyrir WAN og geymdu aðeins nauðsynlegar gáttakortanir. Aldrei stilla tækið sem DMZ hýsil eða stilla fulla keilu NAT.
• Slökktu á sjálfvirkri innskráningu og vistaðu lykilorðareiginleika: Ef margir notendur hafa aðgang að tölvunni þinni er mælt með því að þú slökktir á þessum eiginleikum til að koma í veg fyrir óviðkomandi aðgang.
• Veldu notandanafn og lykilorð fyrir sig: Forðastu að nota notendanafn og lykilorð samfélagsmiðilsins þíns, banka, tölvupóstreiknings o.s.frv., sem notandanafn og lykilorð tækisins þíns, ef samfélagsmiðlum þínum, banka- og tölvupóstreikningsupplýsingum er lekið.
• Takmarka notendaheimildir: Ef fleiri en einn notandi þarf aðgang að kerfinu þínu skaltu ganga úr skugga um að hver notandi fái aðeins nauðsynlegar heimildir.
• Slökkva á UPnP: Þegar UPnP er virkt mun leiðin kortleggja innri höfn sjálfkrafa og kerfið mun sjálfkrafa áframsenda gáttargögn, sem leiðir til hættu á gagnaleka. Þess vegna er mælt með því að slökkva á UPnP ef HTTP og TCP port kortlagning hefur verið virkjuð handvirkt á leiðinni þinni.
• SNMP: Slökktu á SNMP ef þú notar það ekki. Ef þú notar það, þá er mælt með SNMPv3.
• Margspilun: Multicast er ætlað að senda myndband til margra tækja. Ef þú notar ekki þessa aðgerð er mælt með því að slökkva á fjölvarpi á netinu þínu.
• Athugaðu logs: Athugaðu tækjaskrárnar þínar reglulega til að greina óviðkomandi aðgang eða óeðlilegar aðgerðir.
• Líkamleg vernd: Geymið tækið í læstu herbergi eða skáp til að koma í veg fyrir óviðkomandi líkamlegan aðgang.
• Einangraðu myndbandseftirlitsnet: Að einangra myndbandseftirlitsnetið þitt með öðrum þjónustukerfum hjálpar til við að koma í veg fyrir óviðkomandi aðgang að tækjum í öryggiskerfinu þínu frá öðrum þjónustukerfum.

Öryggisviðvaranir
Tækið verður að vera uppsett, viðhaldið og viðhaldið af þjálfuðum fagmanni með nauðsynlega öryggisþekkingu og færni. Áður en þú byrjar að nota tækið skaltu lesa þessa handbók vandlega og ganga úr skugga um að allar viðeigandi kröfur séu uppfylltar til að forðast hættu og eignatap.

Geymsla, flutningur og notkun

• Geymið eða notaðu tækið í viðeigandi umhverfi sem uppfyllir umhverfiskröfur, þar með talið og ekki takmarkað við hitastig, raka, ryk, ætandi lofttegundir, rafsegulgeislun o.s.frv.
• Gakktu úr skugga um að tækið sé tryggilega sett upp eða sett á flatt yfirborð til að koma í veg fyrir að það falli.
• Ekki má stafla tækjum nema annað sé tekið fram.
• Tryggja góða loftræstingu í rekstrarumhverfi. Ekki hylja loftopin á tækinu. Leyfðu nægu plássi fyrir loftræstingu.
• Verndaðu tækið gegn vökva hvers konar.
• Gakktu úr skugga um að aflgjafinn veiti stöðugt magntage sem uppfyllir aflþörf tækisins. Gakktu úr skugga um að framleiðsla aflgjafans fari yfir heildarhámarksafl allra tengdra tækja.
• Gakktu úr skugga um að tækið sé rétt uppsett áður en það er tengt við rafmagn.
• Ekki fjarlægja innsiglið af líkamanum tækisins án þess að ráðfæra sig við fyrirtækið okkar fyrst. Ekki reyna að þjónusta vöruna sjálfur. Hafðu samband við þjálfaðan fagmann vegna viðhalds.
• Taktu tækið alltaf úr sambandi áður en reynt er að færa tækið til.
• Gerðu viðeigandi vatnsheldar ráðstafanir í samræmi við kröfur áður en tækið er notað utandyra.

Aflþörf

• Settu upp og notaðu tækið í ströngu samræmi við staðbundnar rafmagnsöryggisreglur.
• Notaðu UL vottaða aflgjafa sem uppfyllir LPS kröfur ef millistykki er notað.
• Notaðu ráðlagða snúru (rafsnúru) í samræmi við tilgreindar einkunnir.
• Notaðu aðeins straumbreytinn sem fylgir tækinu þínu.
• Notaðu innstungu með verndandi jarðtengingu.
• Jarðtengingu tækisins á réttan hátt ef ætlunin er að jarðtengja tækið.

Varúð við notkun rafhlöðu

• Þegar rafhlaða er notuð skaltu forðast:
  • Mjög hátt eða lágt hitastig og loftþrýstingur við notkun, geymslu og flutning;
  • Skipti um rafhlöðu.
• Notaðu rafhlöðuna rétt. Óviðeigandi notkun rafhlöðunnar eins og eftirfarandi getur valdið hættu á eldi, sprengingu eða leka á eldfimum vökva eða gasi.
  • Skiptu um rafhlöðu fyrir ranga gerð;
  • Fargaðu rafhlöðu í eld eða heitan ofn, eða vélrænt mylja eða skera rafhlöðu;
• Fargaðu notaðu rafhlöðunni í samræmi við staðbundnar reglur eða leiðbeiningar rafhlöðuframleiðandans.

Endurskoðunarsaga

1. Overall structure and format update.
2. Added ANPR-1107 to the Applicable product models

Inngangur

Viðeigandi vörulíkön

Útgáfa	Fyrirmynd	Lýsing og forskrift	Athugasemdir
ANPR_B1107	PKC2641-Z100-IR-P(-NB)	4MP Overseas Recognition Of Vehicle License Plate Bullet IP Camera (10-50mm, PoE, H.265, Infrared), Overseas Version	Recommended for road scenes
	PKC2641-Z100-P(-NB)	4MP Overseas Recognition Of Vehicle License Plate Bullet IP Camera (10-50mm, PoE, H.265, White Light), Overseas Version
	PKC2641-Z80-IR-P(-NB)	4MP Overseas Recognition Of Vehicle License Plate Bullet IP Camera (8-32mm, PoE, H.265, Infrared), Overseas Version
	PKC2641-Z80-P(-NB)	4MP Overseas Recognition Of Vehicle License Plate Bullet IP Camera (8-32mm, PoE, H.265, White Light), Overseas Version
	PKC2641-Z28-IR-P(-NB)	4MP Overseas Recognition Of Vehicle License Plate Bullet IP Camera (2.8-12mm, PoE, H.265, Infrared), Overseas Version	Recommended for entrance/exit scenes
	PKC2641-Z28-P(-NB)	4MP Overseas Recognition Of Vehicle License Plate Bullet IP Camera (2.8-12mm, PoE, H.265, White Light), Overseas Version
ANPR_B1103/ ANPR_B1105	PKC2640@Z28-P(-NB)	UNV, PKC2640@Z28-P, 4MP Vehicle License Plate Recognition Bullet IP Camera (2.8-12mm, PoE, H.265, White Light), Overseas Version	Recommended for entrance/exit scenes
	PKC2640@Z28-IR-P(-NB)	UNV, PKC2640@Z28-IR-P, 4MP Vehicle License Plate Recognition Bullet IP Camera (2.8-12mm, PoE, H.265, Infrared), Overseas Version
	PKC2630@Z28-P(-NB)	UNV, PKC2630@Z28-P, 3MP Vehicle License Plate Recognition Bullet IP Camera (2.8-12mm, PoE, H.265, White Light), Overseas Version
	PKC2630@Z28-IR-P(-NB)	UNV, PKC2630@Z28-IR-P, 3MP Vehicle License Plate Recognition Bullet IP Camera (2.8-12mm, PoE, H.265, Infrared), Overseas Version
	PKC2640@Z80-P(-NB)	UNV, PKC2640@Z80-P, 4MP Vehicle License Plate Recognition Bullet IP Camera (8-32mm, PoE, H.265, White Light), Overseas Version	Recommended for road scenes
	PKC2640@Z80-IR-P(-NB)	UNV, PKC2640@Z80-IR-P, 4MP Vehicle License Plate Recognition Bullet IP Camera (8-32mm, PoE, H.265, Infrared), Overseas Version
	HC121@TS8C(R)-Z(-NB)	UNV, HC121@TS8C-Z, 2MP Vehicle License Plate Recognition Bullet IP Camera (4.7-47mm, Starlight, PoE, H.265, White Light), Overseas Version	Used for entrance/exit and road scenes

Vefkönnun
Before the site survey, you need to have a comprehensive understanding of the project, including background, scale, quality objectives, cycle, bidding documents, contracts, design plans, and drawings. Then you can conduct a survey on site based on the above information, and combine the survey results with the customer’s needs to decide the exact installation location of the device.

Scene Requirements

Entrance/Exit Scenes

1. Supported speed ≤ 30km/h.
2. It is recommended to install the camera on the side of the road. The ideal environment is that the lane width is 3m to 4.5m, and the capture distance is over 3 meters from the camera to the capture point, which allows the vehicle to adjust the vehicle body angle and its license plate can be fully captured when the vehicle passes through the capture point. If the actual environment differs significantly from the ideal environment, please contact the product department to confirm the installation scheme.
3. Avoid any obstruction of the camera by road signs, guide signs, trees, sentry boxes, etc.
   Table 2-1 Normal snapshot in entrance/exit

Road Scenes

1. Supported speed ≤ 80km/h.
2. It is recommended to install the camera on the center of the road, facing the incoming vehicles. For winding roads or uphill and downhill roads with big slope, please contact the product department to confirm the installation scheme.
3. Determine a suitable distance from the pole to the capture point. Otherwise, the capture rate may be affected.
4. Avoid any obstruction of the camera by road signs, guide signs, trees, sentry boxes, etc.

Uppsetning tækis

Kröfur um horn

Uppsetningarkröfur:

1. The horizontal angle of the camera to the license plate center should be no more than 45°.
2. The vertical angle of the camera should be no more than 30° (recommended: about 20°).
3. The horizontal tilt angle of the license plate should be no more than ±15°.
4. The pixel size of the license plate should be 90 to 300px (optimal recognition pixel: about 130px).

Uppsetningaráætlun

Vettvangur	Gerð tækis	Road Width W (m)	Myndavélarhæð H (m)	Handtaka fjarlægð L (m)	Fjarlægð frá Camera to Roadside S (m)	Recommended Scheme	Stuðningur ted Hraði (km/klst)
		W≤4	1.5 – 2	3 -11		H=1.5m, L=4m
	PKC2641-Z28-P (-NB)
	PKC2641-Z28-IR-P (-NB)	4	2 – 2.5	4 – 13		H=2m, L=5m
Entranc e/Exit					0 – 0.3		V≤30
		5	2.5 – 3	5 – 16		H=2.5m, L=7m
	PKC2630@Z28	W≤4	1.5-2	3-11		H=1.5m, L=4m
	PKC2640@Z28	4	2-2.5	4-13		H=2m, L=5m
	HC121@TS8C-Z
	HC121@TS8CR-Z	5	2.5-3	5-16		H=2.5m, L=7m
	PKC2641-Z80-IR-P (-NB)					(1)H=3m, L=8 m
	PKC2641-Z80-P (-NB) PKC2641-Z100-IR-P (-NB)	6	3 -6	6 -48		(2)H=4m, L=10 m (3)H=5m, L=13m
	PKC2641-Z100-P (-NB)					(4)H=6m, L=16m
						H=3m, L=8 m
Vegur					0 -7	H=4m, L=10m	V≤80
	PKC2640@Z80	6	3-6	6-48
						H=5m, L=13m
						H=6m, L=16m
	HC121@TS8C-Z HC121@TS8CR-Z	6	3-6	6-60		H=3m, L=8m

Site Deployment Configuration

Skráðu þig inn
It is recommended to use a non-IE browser to log in to the camera. Some functions are unavailable to IE.

Innskráning tækis
By default, DHCP is enabled for the camera. If a DHCP server is configured, the camera IP may be dynamically assigned by the DHCP server, and in this case, please use the actual IP for login. If there is no DHCP server, use the default IP 192.168.1.13.

Innskráningarskref:

1. Visit the camera IP using a web browser, and input the username and password to log in to the camera. The default username/password is admin/123456.
2. You can click Reset to clear the username and password.

Lykilorðsbreyting
The password must be changed to a strong one when the camera is used for the first time.

Uppsetningarhjálp

Staðfesting
the version information is ANPR-B1103/1105/1107.XXX

Viðurkenning

1. Gangsetning
2. Preliminary adjustment of camera installation angle: Park a vehicle at the capture point for adjusting the camera’s installation angle.
3. Adjust the zoom and focus manually.
4. Adjust the zoom by clicking zoom + or zoom -, or enter a zoom value (max. 160) directly. Adjust appropriately according to the actual requirements on site
5. Click focus + or focus – till the license plate is properly focused.
   
6. Draw detection area (detection rules)
   • Staða: Usually the detection area is at the lower part of the image
   • Hæð: The height of the detection area occupies 1/3 to 1/2 of the total height. It is necessary to consider both large trucks and small cars, as the license plates of trucks are much higher than those of small vehicles.
   • Width on both sides: It must include the outermost left and right parts where vehicles may pass through. At the same time, make sure the detection area is not too wide (not exceeding 2/3 of the image width), otherwise there may be problems of prolonged capture time and mistaken capture of adjacent vehicles.
7. Ljúktu
   After finishing drawing the detection area and confirming that the size of the license plate matches the requirements, click Next button. A dialog box as shown below appears. Click OK to complete the configuration

Basic Config

IP stillingar
Veldu View>Basic Config. Change IP Address, Subnet Mask, and Default Gateway, and click OK to save the configuration

Kveikjuhamur
The default is Trigger by Video, complete the configuration according to the actual requirements.

Kveikjuhamur	Lýsing
Trigger by Video	When a vehicle passes the recognition frame, if the capture condition is met, the camera will capture and recognize the vehicle automatically.
Trigger by Loop	When the camera’s alarm input is connected to an external device such as a detection loop, a vehicle passing by the external device will trigger the camera to capture and recognize the vehicle

Land
Complete the configuration according to the actual requirements

Hreyfingarstefna
Complete the configuration according to the actual requirement

Hreyfingarstefna	Lýsing
Bæði	Vehicles enter the live video image from both directions.
Niður	Vehicles enter the live video image from the top.
Upp á við	Vehicles enter the live video image from the bottom.

Function Configuration (Optional)

The configurations described in this chapter are optional and should be set according to the on-site requirements.

Ítarlegri

ANPR-1105/ANPR1107

1. Generate Vehicle Pass-thru Records Without Recognition
   When enabled, the camera can capture images of unlicensed vehicles and generate records. When disabled, unlicensed vehicles will not be captured and no records will be generated.
   This function is enabled by default. Configurations should be adjusted based on the actual site needs.
2. Vehicle Characteristics Recognition
   This function is disabled by default. When enabled, the camera can recognize vehicle feature information.

ANPR-1103

1. Generate Vehicle Pass-thru Records Without Recognition
   When enabled, the camera can capture images of unlicensed vehicles and generate records. When disabled, unlicensed vehicles will not be captured and no records will be generated.
   This function is enabled by default. Configurations should be adjusted based on the actual site needs.
2. Vehicle Characteristics Recognition
   This function is disabled by default. When enabled, the camera can recognize vehicle feature information.
3. Identify Deceptive License Plate
   When enabled, the camera can filter out plates without driving trajectories and non-genuine license plates.
4. Same Plate Output
   Repeated snapshots can be taken when the same vehicle stays in the live view after the “Same Plate Output Interval” time has passed

Bílalista
You can allow specific vehicles to pass freely by configuring a vehicle list and a let-through policy. When operating alone, the camera determines whether to let vehicles pass based on the vehicle list and let-through policy saved on the camera. When connected to a server, both the camera and the server can control automatic vehicle passing.

Identified Vehicle Through Mode

Identified Vehicle Í gegnum ham	Let Through All	Let Through Allowlist Vehicle	Let Through Allowlist Vehicle When Offline	Let Through Non- Blocklist Vehicle
Leyfislisti	Let through	Let through	Let through	Let through
Lokalisti	Let through	Not be let through	Not be let through	Not be let through
Non-Blocklist / Non- Allowlist	Let through	Not be let through	Not be let through	Let through

ATH!
Let Through Allowlist Vehicle When Offline. This setting is effective only when the camera is registered with the server via the HTTP protocol.

Samsvörunarstilling

• Allowlist Matching Mode/Blocklist Matching Mode
  • Exact Matching: Default mode. In this mode, a full matching plate number is required before the vehicle is let to pass through or not pass through.
  • Samsvörun: Performs fuzzy matching through Allow Unmatched Character(s).
• Allow Unmatched Character (s): The allowed number of non-matching characters can be set to 0/1/2, corresponding to the number of characters in the plate that are allowed to not match. Within this range, the vehicle is considered on the allowlist or blocklist

Let Through Delay (s)
The default and recommended value are 0s. This parameter is effective when the camera operates alone (not connected to any server).

Bílalista

1. Bæta við
   Click Add, enter the Plate Number, Start Time, End Time, and then click OK. The vehicle is added to the Allowlist/Blocklist.
2. Lotuinnflutningur
   Import plate numbers to allowlist in batches
   Export the template, complete vehicle information in accordance with the template format, and then import the file ATH!
   Import will fail if start time and end time are not specified in the imported file;
   Import plate numbers to blocklist in batches
   Export the template, complete vehicle information in accordance with the template format, and then import the file. ATH!
   Import will fail if start time and end time are not specified in the imported file;
3. Eyða völdum
   Select vehicle (s) in the list, and then click Delete Selected. The selected vehicle (s) are deleted.
4. Clear Library Data
   Varúð: The Clear Library Data operation will delete all data from the list.

OSD

Lifandi View
Configure live video OSD at Setup > OSD > Live View according to actual requirements. Date & Time OSD is enabled by default.

Mynd
Configure photo OSD at Setup > OSD > Photo according to actual requirements. Time and Plate Number OSDs are enabled by default.

ATH!
The camera can not recognize vehicle features. Recommend unchecking Vehicle Logo, Vehicle Make&Model, Vehicle Color, Vehicle Type in photo OSD settings

Dual-Camera Parameters

ATH!

• The camera does not support enabling Single-Channel Camera for Mix Entry&Exit and Primary and Secondary Cameras on Same Side simultaneously.
• Configure two LPR cameras: IPC1 and IPC2.The software versions of IPC1 and IPC2 cameras need to be consistent.

Single-Channel Camera for Mix Entry&Exit
This solution is applicable when the lanes are not wide enough to provide an entrance and an exit separately

1. Log in to IPC1’s web interface, choose Setup > Network > Dual-Camera Parameters. Select Single-Channel Camera for Mix Entry&Exit.
2. For Secondary Camera IP, set IPC2’s IP as the Secondary Camera IP
3. The default setting for Match Time for Entry and Exit Mix (s) is 300, and you can modify the value as needed.
4. Log in to IPC2’s web interface, choose Setup > Network > Dual-Camera Parameters. Select Single-Channel Camera for Mix Entry&Exit.
5. For Secondary Camera IP, set IPC1’s IP as the Secondary Camera IP
6. The default setting for Match Time for Entry and Exit Mix (s) shall be kept the same as that of IPC1

Primary and Secondary Cameras on Same Side
Suitable for wide-lane scenarios, where the primary and secondary cameras will capture the same scene simultaneously, and the primary camera will judge the capture result

IPC1 Configuration

1. Log in to IPC1’s web interface, choose Stup > Network > Dual-Camera Parameters. Select Primary and Secondary Cameras on Same Side
2. Camera Type select Primary Camera
3. For Secondary Camera IP, set IPC2’s IP as the Secondary Camera IP

IPC2 Configuration
The parameters of IPC2 will be modified by IPC1, no configuration is required.

VARÚÐ!

• When Primary and Secondary Cameras on Same Side is enabled, Quick Report of Vehicle Passing Records through HTTP is unavailable. If you enable Quick Report of Vehicle Passing Records, it will be disabled by force when uploading data.
• After the primary camera is configured, its configuration will be synced to the secondary camera. The secondary camera needs no extra configuration.
• After Primary and Secondary Cameras on Same Side is enabled, the secondary camera will sync time with the primary camera.
• The primary camera and the secondary camera must have the same version number.
• If the two cameras are different products, please contact technical support before you configure Primary and Secondary Cameras on Same Side.

Mynd
By default, no reconfiguration is required. However, if issues arise on-site, the following configurations should be given particular attention.

Lýsing:
It is recommended to make adjustments within 20%.

Smit

• Choose Stup > Video & Audio > Image to adjust the exposure parameters. In general, the default exposure parameters shown in the image below are suitable for entrance/exit scenes.
• Parameter modification is recommended under the following circumstances:
• When strong backlight or frontlight occurs, causing a decrease in image recognition rate, you can add an Image Scene Template in Scenes and configure exposure compensation during the strong backlight or frontlight time period for optimization.
  • In frontlight scenes, reduce Compensation appropriately.
  • In backlight scenes, increase Compensation appropriately.
• When customers require higher brightness for nighttime images, and noise is acceptable, you can slightly increase the gain. Increasing the shutter is not recommended. When the shutter is above 1/4000, license plates may exhibit motion blur, affecting license plate recognition.

Snjöll lýsing

• Choose Setup > Video & Audio > Image. The default illuminator settings are as shown below. You can adjust the illumination brightness as needed.
• Illumination level: The higher the setting, the brighter the light. Adjust according to the brightness of the license plate on-site. It is recommended to keep the default setting.

Samþætting miðlara

Register the camera with the NVR through the private and ONVIF protocol.

Netkerfi
There are two networking options for connecting the camera and NVR:

1. Netkerfi 1: default, the camera can be directly connected to the NVR via a network cable, without extra configuration on the IPC and NVR required.
2. Netkerfi 2: The camera is connected to the NVR via a switch. Ensure that the communication between the camera and NVR is normal. Configuration details can be found in 5.2 Add the camera on the NVR.

Add the camera on the NVR
Connect the camera to the NVR through a network switch. Make sure the IP addresses of the camera and the NVR are within the same network segment. No additional configuration is needed for the camera. Follow the steps below for configuring the server;

Add the camera on the NVR’s web viðmót
Log in to the NVR’s web interface, go to Setup > Camera > Camera. Choose a channel, click Modify, and then set Add Modes to IP Address, set Protocol to Private or ONVIF, and set the camera’s IP address, port number, username, and password according to the actual configuration of the camera

Add the camera on the NVR’s local interface
Log in to the NVR’s local interface, go to Setup > Camera > Camera. Click Custom Add, choose the camera to add, enter the correct password of the camera, choose Private or ONVIF as the protocol, and then click OK. The camera is added. Check the icon under Status. A green icon means the camera is online. A gray icon means the camera is offline

Viðhald

Uppfærsla
In this pane, you can upgrade or roll back the camera firmware version. The operation steps are as follows:

1. Store the upgrade package to a local path, such as D:\update.
2. Choose Maintenance > Maintenance > Maintenance
3. Click Browse… and select the upgrade package so that the text box shows the path, such as D:\update\Upgrade package name
4. Click Upgrade. Then, a progress bar is displayed during the upgrade.
5. After the upgrade, log in to the camera again.
6. Choose Maintenance > Maintenance >Device Status, check the version information

Upplýsingar um greiningu
You can export camera diagnosis information to a specific directory or directly open the camera diagnosis information file to locate problems. The operations are as follows:

1. Choose Maintenance > Maintenance > Maintenance
2. Click Browse…, select a local path, and click Export to export the camera diagnosis information for problem locating.

Algengar spurningar

Er myndavélin veðurheld?

Yes, the 4MP Bullet LPR Camera is designed to be weatherproof and suitable for outdoor use.

Hvernig uppfæri ég fastbúnaðinn?

Firmware updates can be done by downloading the latest firmware version from the manufacturer's websíðuna og fylgdu meðfylgjandi leiðbeiningum um uppsetningu.

Skjöl / auðlindir

Uniview ITC413-PW4D-IZ1 4MP Bullet LPR myndavél [pdfNotendahandbók PKC2640 Z80-IR-P, ITC413-PW4D-IZ1 4MP Bullet LPR Camera, ITC413-PW4D-IZ1, 4MP Bullet LPR Camera, LPR Camera, Camera

Heimildir

• Notendahandbók