Zero 88 FLX S24 stjórnborðið er notendahandbók fyrir 24 ljósstýringar með faders.

Sækja ZerOS sýninguna File frá meðfylgjandi hlekk.
Notaðu þetta file til að stjórna sjónrænum framsetningum Dockhouse Capture file með ZerOS leikjatölvu eða Phantom ZerOS.

Stjórnun handtöku Files

Keyra myndræna upptöku file á tölvunni þinni.
You can control your virtual venue in Capture from your ZerOS console.
Selecting fixtures in either program will automatically select them in the other system, too.

Capture is a visualisation software package that allows you to emulate fixtures in a venue, so you can pre-program your show when away from the real venue.
Það er fyrrverandiample Capture project you can download free of charge. You can control this Capture project with your console or Phantom ZerOS, which is ideal for learning how to use ZerOS.

Smelltu hér til að fá frekari upplýsingar um Capture
Smelltu hér til að sækja myndræna myndvinnslu fyrir „Dockhouse“ files
Once downloaded, extract/unzip the “Dockhouse” download, and open the unzipped folder.

Within the folder will be the following items:

Þá þarftu að hlaða niður ZerOS sýningunni. file til að leyfa þér að stjórna sjónrænni upptöku „Dockhouse“ file.
Smelltu hér til að sækja ZerOS sýninguna File
ZeroOS sýningin file mun leyfa þér að stjórna „Dockhouse“ myndatökunni file from either a physical ZerOS console, such as FLX, or Phantom ZerOS.

Smelltu hér til að hlaða niður sérstöku sýningarformi file fyrir FLX S leikjatölvur

It is possible to control Capture visualisation from Phantom ZerOS running on the same PC. Using the CITP protocol to control your Capture visualisation file, there is no need for a Phantom ZerOS unlock dongle.

To output Art-Net or sACN from Phantom ZerOS, an unlock dongle is required.
To control the venues from Phantom ZerOS, first copy the required ZerOS show file (.zos) to your Phantom local drive on your PC. For information on configuring your Phantom Local Drive, click here.

Then run Phantom ZerOS as your chosen Desk Type. After loading, open the Monitor 1 window (or LCD on FLX S24), and then tap the Insert key on your PC. This will take you into Setup.
Choose Load from the left-hand side, and then choose your ZerOS show file þarf til að stjórna völdum sjónrænum möguleikum file.

Sýningin file was created using a FLX console, and so if you are using a different console type, you will receive warnings to inform you that some information may not be loaded.
After loading the show file, tap Insert again to take you into Setup, and then choose Universes. Under the CITP settings within the Universes tab, ensure that the CITP IP is set to use 127.0.0.1.

This is the loopback IP address of your PC, allowing Phantom ZerOS to control Capture. There is no need for any other network settings (such as Art- Net or sACN) to be enabled. Then tap Insert again to save and close.
Keyrðu síðan myndræna upptöku (Capture visualization) file.
Using Phantom ZerOS, you will then start to control the lights in your virtual venue in Capture. When fixtures are selected in either program, they will automatically be selected in the other software package too.

Með því að tengja stjórnborðið við tölvuna þína í gegnum Ethernet er hægt að stjórna myndrænum upptökum. file. You can do this by directly connecting your console and laptop with a single Ethernet cable, or you can connect them as part of a larger network.
Firstly, copy the ZerOS show file you have downloaded to a USB stick. Then plug this into your ZerOS console. On your ZerOS console, tap Setup -> Load, and choose the show file to load in.

Sýningin file was created using a FLX console, and so if you are using a different console type, you will receive warnings to inform you that some information may not be loaded.
If you wish to connect your ZerOS console and PC directly using a standard Ethernet cable, you will need to change the IP address of your PC to be able to communicate with your console.

The ZerOS show files use CITP to communicate with Capture. They have been preconfigured with the CITP IP address of 10.1.1.88 and a subnet of 255.0.0.0.
To save reconfiguring both your PC and console, you can therefore change your PC’s IP address to be within range of the CITP IP of the console. For example, you could use the following IP on your PC.

IP tölu: 10.1.1.10
Undirnetsmaski: 255.0.0.0
Keyrðu síðan myndræna upptöku (Capture visualization) file.
You should find that you are controlling your virtual venue in Capture from your ZerOS console. When fixtures are selected in either program, they will automatically be selected on the other system too. In Capture, selected fixtures are highlighted in red.
If you are having difficulty, you may need to configure your Windows Firewall settings. To do this, tap the Windows Key (Start) and type “Allow an app through Windows Firewall”.

Windows should find the relevant Control Panel article for you to press Enter to go to. Then click “Change Settings” from the top, and if your Capture file is not listed, click “Allow another app”. If it is listed, ensure it is ticked to have permission.
If you are still having difficulty, try running the Capture visualisation as an administrator.
To find out how to configure your PC’s Ethernet IP, click here.

Horfðu á ZerOS & Capture þjálfunina hér…

https://youtu.be/2Bp31AOcqNo

How can I configure my PC's Ethernet IP?

To configure your PC's Ethernet IP, click on the provided link for detailed instructions.

Where can I find ZerOS & Capture training sessions?

You can watch the ZerOS & Capture training session by following the provided YouTube link.

Zero 88 FLX S24 stjórnborðið er 24 ljósastýring með faders. [pdfNotendahandbók
FLX, FLX S24, FLX S24 stjórnborð er 24 fader ljósastýring, FLX S24, stjórnborð er 24 fader ljósastýring, 24 fader ljósastýring, Ljósastýring, Stjórnun

Skildu eftir athugasemd